http://www.www.wdidevice.com/Industrial Sensors and Process Automation.EnTue, 22 Nov 2011 11:39:19 -0500Tue, 22 Nov 2011 11:39:19 -0500http://www.www.wdidevice.com/mic4-laser-machining-microscope/ MIC4 Laser machining microscope   The only commercially available microscope guaranteeing transmission of more then 80% for all four YAG laser harmonics 266, 355, 532, and 1064nm without compromising the review channel fidelity. In response to industry demand, WDI has introduced the new microscope MIC4, capable of assisting in laser repair of TFT arrays over a wavelength range from infrared (1064 nm) to deep ultraviolet (266 nm). This innovation facilitates efficient trimming of metals, silicon and ITO as well as open line repair, within a single piece of repair equipment. The MIC4 is fully compatible with the ATF4, ATF5, and LLC6 linear lens changer products which are all members of the WDI family of products supporting the FPD fabrication process. MIC4 goes beyond TFT repair and is fully able to support the following applications   Application samples: TFT Array inspection/repair TFT Array Cell/Module inspection/repair Photo mask inspection/repair Laser Micro machining Microscopic Manufacturing Download BrochureThu, 01 Feb 2007 12:00:00 ESThttp://www.www.wdidevice.com/mic4-laser-machining-microscope/http://www.www.wdidevice.com/atf5-aoi-application/ Fast Auto-Focus Tracking on TFT arrays AOI Application Requirement: In AOI application, the TFT array is scanned in X or Y direction in search of a cause of a line defect. Line scan camera is used to localize the defect(s) The purpose of the fast AF tracking system is to maintain microscope within its depth of field during scanning motion Fri, 04 May 2007 12:00:00 EDThttp://www.www.wdidevice.com/atf5-aoi-application/http://www.www.wdidevice.com/atf5-critical-dimension-measurement-application/ Application of ATF-5 Auto-Focus Sensor to Critical Dimension Measurements on TFT Arrays For the purpose of: Setting up the CVD parameters, validating the Line Open Repair (LOR), there is a need to measure the thickness profile of the CVD deposited jumper traces. The desired jumper trace thickness is - depending on the array type - 0.2 to 0.5 m (typically 0.3 m The CVD race thickness should be measured with an accuracy of at least 0.03 m Fri, 01 Jun 2007 12:00:00 EDThttp://www.www.wdidevice.com/atf5-critical-dimension-measurement-application/http://www.www.wdidevice.com/photonics-west-san-jose-jan-22-24-2008/ Wegu-Device Inc. will be participating in the... ...from January 22 to 24 2008. We invite you to visit us at the Canadian Pavilion in booth 6098-18.Wed, 19 Dec 2007 12:00:00 ESThttp://www.www.wdidevice.com/photonics-west-san-jose-jan-22-24-2008/http://www.www.wdidevice.com/wdi-is-proud-to-announce-the-release-of-a-new-lens-changer-model-the-llc4/ WDI is proud to announce the release of a new Lens Changer Model the LLC4.   The new compact LLC4 holds 4 lenses to better fit into smaller tighter spaces. The physical dimensions of the LLC4 are avaiable in a PDF document, LLC4 Physical Dimensions. As with the LLC6 the LLC4 is a precise linear lens changer with 4 lens ports providing ultra fast, automatic lens changing without the need of re-qualifying the lens.   The lens changer is cleanroom class 100 compatible.    Wed, 09 Apr 2008 12:00:00 EDThttp://www.www.wdidevice.com/wdi-is-proud-to-announce-the-release-of-a-new-lens-changer-model-the-llc4/http://www.www.wdidevice.com/it-is-with-great-pleasure-that-we-announce-the-introduction-of-the-newest-member-of-the-auto-focus-family-of-sensors-the-atf6-laser-auto-focus-and-tracking-sensor-for-the-semi-conductor-industry/It is with great pleasure that we announce the introduction of the newest member of the Auto Focus Family of sensors, The ATF6 Laser Auto Focus and Tracking Sensor for the Semi-Conductor Industry.   The ATF6 extended the scope of applications of the ATF5 to cover Semicon patterned wafer and Semicon photomasks. The ATF6 also includes all the ATF5 applications.Fri, 13 Jun 2008 12:00:00 EDThttp://www.www.wdidevice.com/it-is-with-great-pleasure-that-we-announce-the-introduction-of-the-newest-member-of-the-auto-focus-family-of-sensors-the-atf6-laser-auto-focus-and-tracking-sensor-for-the-semi-conductor-industry/http://www.www.wdidevice.com/wdi-employment-opportunities/ WDI has 2 exciting Employment Opportunities open:   Applications Engineer Mechanical Engineer   Please forward all resumes to info@wdidevice.comMon, 16 Jun 2008 12:00:00 EDThttp://www.www.wdidevice.com/wdi-employment-opportunities/http://www.www.wdidevice.com/semicon-west-2008/ WDI is please to annouce its participation in SEMICON West 2008. WDI will be exhibiting with Nippon Pulse America from July 15th to July 17th at the San Francisco Moscone Center. Please come visit us there.Fri, 11 Jul 2008 12:00:00 EDThttp://www.www.wdidevice.com/semicon-west-2008/http://www.www.wdidevice.com/nominated-for-the-spie-prism-award-for-photonics-innovation/ WDI's ATF6 is nominated for the... ...in the category of Detectors, Sensing & Imaging SystemsWed, 27 Aug 2008 12:00:00 EDThttp://www.www.wdidevice.com/nominated-for-the-spie-prism-award-for-photonics-innovation/http://www.www.wdidevice.com/wdi-is-proudly-sponsoring-the-pickering-athletic-center/ WDI is proudly sponsoring the...     Information on the center can be found at: www.pickeringathleticcentre.comThu, 02 Oct 2008 12:00:00 EDThttp://www.www.wdidevice.com/wdi-is-proudly-sponsoring-the-pickering-athletic-center/http://www.www.wdidevice.com/wdi-changes-its-name/ In February 2008 WDI had experienced a change of ownership. WDI was bought out and is now a wholly Canadian owned company. As the final step in the reorganization process, Wegu Device Inc. has changed its name to WDI Wise Device Inc. In part we are making this change to have our company name more closely indicate the purpose of our business as we expand our product line and enter into new application areas. We have retained the word Device in our name as it indicates our strategy to not build entire systems but to provide system integrators with unique devices or components that allow their systems to excel. We have adopted the word Wise as its definition is: having the ability to discern or judge what is true, real or lasting; having good judgement; and being informed and having great learning. This fits well with our strategy of developing products with leading edge technology to provide significant product value after understanding our customers applications and requirements thoroughly. For simplicity and convenience we will continue to refer to ourselves in our abbreviated form of WDI. Some additional changes have also taken place. We now have a new website address which is www.wdidevice.com and our email addresses are now @wdidevice.com. However our old site and old emails will still work and will be redirected to the new address. WDI is excited and proud of these changes as they are indicative of our strong growth and dedication to innovation. We will continue to provide the same products and fine service on which we have built our reputation in the industry.   Sincerely, Halszka Weiss Director of Planning & CoordinationThu, 23 Oct 2008 12:00:00 EDThttp://www.www.wdidevice.com/wdi-changes-its-name/http://www.www.wdidevice.com/wdi-will-exhibit-at-laser-world-of-photonics/WDI will be exhibiting the Laser World of Photonics exhibition in Munich from June 15 to 18 2009.   We can be found in Hall B2 Booth 125 in the Canadian Photonics Consortium.   WDI invites all of its customers and partners to visit us at our booth.Mon, 20 Apr 2009 12:00:00 EDThttp://www.www.wdidevice.com/wdi-will-exhibit-at-laser-world-of-photonics/http://www.www.wdidevice.com/wdi-is-the-winner-of-the-mind-to-market-award-present-by-oce/ WDI is the winner of The Mind to Market Award present by the OCE Ontario Centres of Excellence Inc.   May 12, 2009 07:30 ET New Twist on Making LCD Screens Earns WDI OCE's Mind to Market Award Top Asian manufacturers already competing to use Markham company's LCD technology TORONTO, ONTARIO--(Marketwire - May 12, 2009) - A Markham company that has captured the attention of major electronics manufacturers in Asia due to its money-saving potential in making LCDs has won the 2009 Ontario Centres of Excellence (OCE) Mind to Market Award. Wise Device Inc. (WDI), along with its research partners from the University of Toronto, were presented with the award at Discovery 09 - OCE's annual conference, for its innovative technology that allows manufacturers to produce LCD screens for less. Sponsored by the Ontario Municipal Employees Retirement System (OMERS), the Mind to Market Award celebrates the best OCE-supported commercially successful collaboration between research and industry partners. "We're honoured to receive this award and I'm so appreciative that innovation is being recognized in Ontario," said WDI's President, Dr. Adam Weiss. "This brings much-needed attention to the fact that high-tech companies and innovation are major contributors to Ontario's and Canada's economic engine." WDI is poised to capitalize on the fast growing global market of LCD screens. Despite the global economic downturn, this market is expected to make substantial gains in 2009. WDI's solutions speed up the inspection and repair of LCD screens during the manufacturing process, so companies can expect lower operation costs and a 25 per cent improvement in productivity. For consumers, that translates into less expensive computer monitors and LCD televisions. WDI has already captured the attention of major Asian electronics manufacturers such as Samsung, LG and Sharp. In fact, Asian companies account for 96 per cent of WDI's sales that have topped $5 million. Ironically, Dr. Weiss hopes the Mind to Market award and the exposure of its connection with OCE will generate attention closer to home. The breakthrough laser and optics technologies were brought together by matching WDI's expertise in defining the industry needs and potential markets with targeted research conducted at UofT's Institute for Optical Sciences and at the research facilities of UofT spin-off laser company, Attodyne Inc. "OCE was critical to the entire partnering process," said Dr. Shujie Lin, a senior scientist with the Institute for Optical Sciences. "From starting the relationship with WDI, to funding our research in a timely manner, all the way through to marketing and commercialization - without OCE there would not have been a commercially-viable technology." "This successful collaboration exemplifies what happens when you combine the entrepreneurial spirit and imagination of Ontario companies, with the creative brilliance of our academic researchers," said OCE President and CEO, Mark Romoff who was part of the Mind to Market judging panel of leading minds from science and commerce. "WDI represents the new face of Ontario technology companies: built on partnerships and possessing a solid strategy to compete globally." For Dr. Weiss, the award is also proof that his decision to push a significant amount of revenue towards innovation and new product development since the company's creation in 2005, was the right move. "Innovation is what keeps us afloat in these difficult times," said Dr. Weiss. "Only by introducing innovation and improvements can we stay ahead of the competition." Following that philosophy, Dr. Weiss and WDI plan to expand their technology to the solar panel market. Mirroring LCDs, WDI's technology could again reduce manufacturing costs and accelerate the adoption of solar panels, making them a more cost-effective solution for industries wanting to boost their clean energy portfolio. About the Ontario Centres of Excellence (OCE) Inc. (www.oce-ontario.org) Ontario Centres of Excellence (OCE) Inc. drives the commercialization of cutting-edge research across key market sectors to build the economy of tomorrow and secure Ontario's global competitiveness. In doing this, OCE fosters the training and development of the next generation of innovators and entrepreneurs and is a key partner with Ontario's industry, universities, colleges, research hospitals, investors and governments. OCE's Centres work in communications and information technology, earth and environmental technologies, energy, materials and manufacturing and photonics. OCE is funded by the government of Ontario and is a key partner in delivering Ontario's Innovation Agenda. About Wise Device Inc. (WDI) (www.wdidevice.com) WDI, a technology based company, was founded in 2005 and is headquartered in Ontario Canada. WDI is a leader in development of innovative industrial microscopy equipment and accessories for automated optical inspection, defects review and laser micro machining. WDI's microscopy equipment contributes to the productivity and high yield of practically all the large LCD flat panel display fabrication lines. With the recent expansion of WDI's technology base into pico-second laser applications, WDI expanded its market to the semiconductor wafer, solar cell processing and biomedical field. WDI markets its products through agents and OEM partners in Korea, Japan, Taiwan, China, the US and Europe.Wed, 13 May 2009 12:00:00 EDThttp://www.www.wdidevice.com/wdi-is-the-winner-of-the-mind-to-market-award-present-by-oce/http://www.www.wdidevice.com/wdi-sponsors-local-fastball-team/ WDI is a proud sponsor of the Pickering Fastball Association   The Pickering Heat Fastball Association is an established not-for-profit organization that has been operating in Pickering for 13 years consecutively.  In 2009, the association will field both boys and girls teams from the ages of 10 to 23 and provide an exceptional competitive sport experience that is fully supported by knowledgeable, dedicated coaches and administration, all of whom are community volunteers.   Our teams are affiliated with Softball Ontario and Softball Canada, and play in the North York Women's League against traveling teams representing other communities surrounding the Greater Toronto Region.Tue, 26 May 2009 12:00:00 EDThttp://www.www.wdidevice.com/wdi-sponsors-local-fastball-team/http://www.www.wdidevice.com/photonics-industrial-innovation-at-the-speed-of-light/ Photonics: Industrial innovation at the speed of light.   Download the complete Globe & Mail Special Information Supplement    Tue, 02 Jun 2009 12:00:00 EDThttp://www.www.wdidevice.com/photonics-industrial-innovation-at-the-speed-of-light/http://www.www.wdidevice.com/wdis-new-aoi-automated-optical-inspection-microscope/ WDI's AOI (automated optical inspection) Microscope is designed for fast scanning and defect review applications of a variety of specimens including bare glass, TFT array and colour filter. It provides exceptional image quality, and is limited only by the selection of the microscope objective lens. The microscope features a sturdy but lightweight mechanical design making it particularly suitable for installing on fast accelerating/decelerating gantries. The microscope design supports operation in a class 10 clean-room environment. Model: MIC4-AOITue, 14 Jul 2009 12:00:00 EDThttp://www.www.wdidevice.com/wdis-new-aoi-automated-optical-inspection-microscope/http://www.www.wdidevice.com/new-laser-micro-machining-microscope/ WDI has streamlined its Laser Micro-Machining Microscope the MIC4-LMM. This new model comes as a stand alone unit or integrated with WDI's renowned ATF (auto focus) sensors. The unit is plug and play and comes prealigned to the customers specific needs. WDI's Laser Micro-machining Microscope has been designed to provide: exceptional image quality compatibility with 1/3 , 1/2, and 2/3 inch CCD cameras very high mechanical stability compliance with the clean room 100 standard compactness and low weight integrated electronics with minimal cabling a single point of control and communication compliance with SEMI and CE standards The basic Laser Micro-machining Microscope can be purchased in a fully integrated Payload (LMM-PL-34) unit which consists of the following main components: Laser Micro-Machining Microscope MIC4-LMM "Z" Power Stage ZPS Linear Lens Changer LLC6 Laser Auto-Focus Sensor ATF Integrated White LED field light illuminator WLED Multi Function Controller MFC Optionally, WDI may provide: Back light LED illuminator with controller YAG laser according to customer's specification CCD camera according to the customer's specification Complete payload alignment, so it comes ready to use "straight from the box" Tue, 14 Jul 2009 12:00:00 EDThttp://www.www.wdidevice.com/new-laser-micro-machining-microscope/http://www.www.wdidevice.com/new-vmuvmu-l-mitutoyo-microscope-interfaces-for-atf-sensors/ WDI has ready to go interfaces for the Mitutoyo VMU and VMU-L microscopes and our ATF sensors. This allows for quick plug and play with minimal operator alignment and adjustment. This set up is compatible with all WDI auto focus sensors.   Thu, 16 Jul 2009 12:00:00 EDThttp://www.www.wdidevice.com/new-vmuvmu-l-mitutoyo-microscope-interfaces-for-atf-sensors/http://www.www.wdidevice.com/plug-play-interface-for-navitar-zoom-lens-and-atf-sensors/ WDI's Auto-Focus Actuator System (AFA-01) has been specifically designed to provide motorized Z actuation for Navitar zoom microscopes. It mounts directly onto Navitar's Optical Interface module and is compatible with x6 and x12 zoom systems, both manual and motorized.   The AFA-01 is integrated with Navitar's optical interface (Navitar P/N: 1-5175212X). The base Auto-Focus Actuator (AFA-01) system includes the following components: Optical interface from Navitar 1-5175212 Integrated Auto-Focus Actuator AFA-01 Laser Auto-Focus Sensor ATF Integrated White LED field light illuminator WLED Zoom stage motor controller MCZ   Optionally, WDI may provide: A back light LED illuminator with the controller Navitar zoom lens according to user's choice CCD camera according to the customer's specification Complete payload alignment, so that it is ready to use straight from the box  Thu, 16 Jul 2009 12:00:00 EDThttp://www.www.wdidevice.com/plug-play-interface-for-navitar-zoom-lens-and-atf-sensors/http://www.www.wdidevice.com/olympus-microscopes-interface-for-atf-sensors/ WDI introduces an interface unit for Olympus Microscopes and ATF sensors. The interface can be used for all ATF units insuring easy integration. Thu, 22 Oct 2009 12:00:00 EDThttp://www.www.wdidevice.com/olympus-microscopes-interface-for-atf-sensors/http://www.www.wdidevice.com/wdi-is-growing/ We are looking for bright, enthusiatic individuals to joing our team. As a result we have the following open positions; Production Technician Develpoment Engineer Mon, 07 Dec 2009 12:00:00 ESThttp://www.www.wdidevice.com/wdi-is-growing/http://www.www.wdidevice.com/wdi-is-proud-to-support-2-of-our-employees-that-have-undertaken-the-challenge-of-cycling-through-toronto-to-raise-awareness-and-support-for-2-noble-fundraising-causes/WDI is proud to support 2 of our employees that have undertaken the challenge of cycling through Toronto to raise awareness and support for 2 noble fund raising causes. Elizabeth Lee rode 25 km on Sunday June 6th for "The Heart & Stroke Ride for Heart. Mike Morrison cycled over 200 km from Toronto to Niagara falls over the course of 2 days, June 12th- 13th for "The Ride to Conquer Cancer. Their colleagues as well as WDI have come together to support their efforts. Tue, 15 Jun 2010 12:00:00 EDThttp://www.www.wdidevice.com/wdi-is-proud-to-support-2-of-our-employees-that-have-undertaken-the-challenge-of-cycling-through-toronto-to-raise-awareness-and-support-for-2-noble-fundraising-causes/http://www.www.wdidevice.com/wdi-opens-new-facility-in-poland/ WDI is proud to announce the opening of a new facility in Wroclaw Poland. Due to the overwhelming interest in WDI products from all over the world, we have decided to open a new facility to help facilitate ease of communication and support for our customers. The facility will also assist in the further development of WDI products for biological applications.   We at WDI would like to thank all of our customers and vendors for their support, as well as welcome the new European Team.Wed, 06 Oct 2010 12:00:00 EDThttp://www.www.wdidevice.com/wdi-opens-new-facility-in-poland/http://www.www.wdidevice.com/wdi-will-take-part-in-expolab-2010-nov-3rd-to-5th/ WDI will take part in ExpoLab 2010, Nov 3rd to 5th. WDI will be exhibiting with CS Creative Solutions and showcasing a number of our products, as well as featuring the new MMS microscope. These products will be shown with integration options specifically those available for CS microscopes.   Adam Weiss, the president of WDI, will also be presenting 2 lectures at Expolab on the topics of microscopy.   As well at Expolab WDI will be welcoming the newest members to the WDI team. Representatives from the newly opened WDI Europa facility will attend the show.Wed, 13 Oct 2010 12:00:00 EDThttp://www.www.wdidevice.com/wdi-will-take-part-in-expolab-2010-nov-3rd-to-5th/http://www.www.wdidevice.com/lorem-ipsum-dolor-sit-amet-consectetur-adipiscing-elit-nunc-ultricies-lacus-non-tincidunt-aliquam-justo-purus-dapibus-massa-eget-luctus-purus-tellus-ac-erat-etiam-nibh-quam-placerat-ac-convallis-eu-pretium-id-neque-sed-sodales-nunc-augue-pellent/ Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc ultricies, lacus non tincidunt aliquam, justo purus dapibus massa, eget luctus purus tellus ac erat. Etiam nibh quam, placerat ac convallis eu, pretium id neque. Sed sodales nunc augue. Pellentesque eget purus est, sed semper magna. Praesent porttitor arcu eget nulla fermentum et volutpat libero interdum. Vestibulum ullamcorper, sapien vel pretium mattis, magna magna consequat nulla, sit amet varius felis diam id tortor. Quisque eu metus urna. Vestibulum nisl orci, consectetur vitae tincidunt ut, ultricies vel turpis. Etiam tristique varius nisi, eget accumsan metus bibendum nec. Donec scelerisque congue eros, ac rutrum diam hendrerit nec. Sed semper tortor vehicula urna ultrices gravida nec quis tellus. Aliquam erat volutpat. Aliquam fringilla, justo vitae tempor consectetur, nisl velit facilisis lorem, eu porta metus massa non dui. Integer odio neque, ultrices nec imperdiet et, dictum eu mauris. Fusce ac eros non neque lobortis pharetra et eget mauris. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Cras eu eleifend turpis. Sed ac nisl tristique turpis tristique interdum rhoncus eget nunc. Nam id cursus sapien. Integer in sem elit. Nam sodales lobortis malesuada. Duis sodales rutrum leo sit amet aliquam. Cras consequat rhoncus eros scelerisque adipiscing. Cras eleifend, augue vel ultrices euismod, tortor massa imperdiet nibh, eget bibendum nibh elit nec risus. Cras suscipit, nulla vitae tempor egestas, lectus tortor fermentum sapien, ultrices vestibulum ligula magna et odio. Nullam interdum suscipit lorem, at tincidunt turpis molestie eu. Proin dictum porttitor est, sed gravida libero porta a. Pellentesque vitae nunc felis, at venenatis erat. Fusce laoreet dolor vel tortor vehicula congue. Integer pharetra, augue vitae ultrices vehicula, ligula erat tristique justo, faucibus elementum elit urna vitae dolor. Integer a augue a ipsum lobortis varius. Proin ipsum justo, sollicitudin sit amet faucibus eu, aliquam nec tellus. Ut in lectus nec urna tempus vehicula a scelerisque justo. Quisque in ipsum sit amet velit porta tempus vel eget urna. Etiam vitae erat at purus molestie aliquet. Etiam aliquam sapien sit amet nulla placerat ultrices. Suspendisse a lorem id magna egestas consequat. Morbi vel dignissim ligula. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Sed semper dictum euismod. In hac habitasse platea dictumst. Sed eu orci nulla, sit amet commodo tortor. Donec malesuada dictum metus, vel mattis lorem placerat quis. Duis aliquam tristique ante, ut dapibus dolor dapibus at. Mauris id lectus magna, in molestie lorem. Suspendisse laoreet turpis in augue convallis eu vestibulum orci convallis. Vivamus imperdiet elit at sapien sodales consequat. Proin mauris magna, aliquet a dignissim pellentesque, luctus eget lorem. Duis quis tellus libero, non lacinia est. Phasellus varius eros non magna dictum sed rhoncus quam pulvinar. Aliquam erat volutpat. In quis condimentum ipsum. Morbi pulvinar viverra lectus, et porttitor dui posuere ac. Nunc et felis enim, viverra ultricies nisi. Cras eget turpis non ante vehicula lacinia id eget justo. Nulla feugiat, diam consequat suscipit viverra, arcu massa molestie ipsum, gravida commodo tortor tellus fringilla quam. Duis tempus magna eget justo lacinia at feugiat lacus accumsan. Sed eu nisi nec risus ultrices pellentesque sit amet at lorem. Suspendisse at lorem ligula, in laoreet massa. Mauris vehicula cursus tempor. Integer in urna lacus. Maecenas iaculis pharetra velit id porta. Morbi arcu tellus, mattis sollicitudin tempus sed, ornare vel elit. Praesent commodo, neque et ultricies viverra, risus augue fermentum erat, quis luctus dui nisi quis massa. Nam blandit lectus ut felis mattis pellentesque. Aenean ac turpis nec lacus euismod cursus. Cras in ligula sed mauris faucibus tristique. Maecenas vestibulum nibh sodales risus tincidunt eu sollicitudin dui fermentum. Aliquam ultricies, est nec tincidunt consequat, felis purus feugiat orci, sit amet viverra justo dui sit amet lorem. Curabitur id libero ut quam molestie malesuada in nec nibh. Proin auctor pellentesque consectetur.Sun, 31 Oct 2010 12:00:00 EDThttp://www.www.wdidevice.com/lorem-ipsum-dolor-sit-amet-consectetur-adipiscing-elit-nunc-ultricies-lacus-non-tincidunt-aliquam-justo-purus-dapibus-massa-eget-luctus-purus-tellus-ac-erat-etiam-nibh-quam-placerat-ac-convallis-eu-pretium-id-neque-sed-sodales-nunc-augue-pellent/http://www.www.wdidevice.com/lorem-ipsum-dolor-sit-amet/Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc vel odio vel tellus tempus porta non sed nisl. Maecenas et tortor id eros gravida mattis sed nec ante. Morbi tempus tortor at arcu pretium porttitor. Mauris sed ipsum felis, id auctor massa. Donec sed tincidunt arcu. Curabitur turpis lectus, placerat eget ullamcorper sit amet, suscipit vitae dui. Sed urna libero, tempor ut tincidunt at, dictum quis justo. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent egestas mi vitae elit porta porttitor. Morbi ac nisi in lacus fermentum mattis. Nunc aliquam, erat vel bibendum rhoncus, nunc erat pharetra velit, vel consectetur diam mauris non urna. Vestibulum adipiscing, eros eu pulvinar dictum, orci nibh elementum odio, at eleifend odio diam nec mi. Praesent vulputate venenatis fermentum. Mon, 01 Nov 2010 12:00:00 EDThttp://www.www.wdidevice.com/lorem-ipsum-dolor-sit-amet/http://www.www.wdidevice.com/seconds-news/Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus a risus sed justo venenatis vestibulum quis vel urna. Ut scelerisque orci et est commodo vestibulum. Vivamus non interdum magna. Nunc porttitor ultrices viverra. Maecenas ultrices, metus et varius adipiscing, risus lorem rhoncus enim, in tempor urna lectus vitae magna. Mauris dignissim leo sed turpis suscipit imperdiet. Ut vehicula urna non tortor gravida ut aliquam odio ultricies. Sed rutrum massa sed turpis dictum imperdiet in quis tellus. Morbi eleifend neque ac risus fringilla sit amet sagittis felis tincidunt. In a arcu ante, vehicula porta elit. Praesent consectetur arcu consectetur justo sagittis fringilla. Morbi sed erat diam. Donec cursus enim blandit quam tristique sollicitudin. Nunc tincidunt risus in lorem viverra et vulputate dolor ullamcorper. Etiam feugiat vestibulum pellentesque.Yat! Sat, 05 Mar 2011 12:00:00 ESThttp://www.www.wdidevice.com/seconds-news/http://www.www.wdidevice.com/expanding-rd-in-wdi-europe-call-for-quotes-offers/ WDI Wise Device Europe Sp. z o.o. ul. Muchoborska 18 54-424 Wrocaw Phone +48 71 78 585 78 Fax +48 71 78 585 78 Cell +48 600 277 028 NIP          8943005937 REGON   021332190 KRS         0000363211          RPO WD:Fundusze Europejskie dla rozwoju Dolnego lska (European Funds for Lower Silesia Development) Projects title: "Forming R&D department required for LASS project   Priority no. 1 Increase of the competitiveness between Lower-Silesian enterprises (Investments for enterprises) Schema 1.1.C Investment grants for enterprises running Research and Development business Regional Operational Program for Lower-Silesian Province 2007- 2013.   Ordered products descriptions:   Product Items Tue, 22 Nov 2011 12:00:00 ESThttp://www.www.wdidevice.com/expanding-rd-in-wdi-europe-call-for-quotes-offers/